Canon imageRUNNER 2545 E571 0002 Error Code

 

Canon imageRUNNER 2545 E571 0002 Error Code Instructions

Below you will find the service manual information for the Canon imageRUNNER 2545 E571 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon imageRUNNER 2545 E571 0002 Error Code

Service Manual Instructions for the Canon imageRUNNER 2545 E571 0002 Error Code

E571 0002
Description :

Causes :
The gripper unit does not return to the gripper unit home position when the Gripper Open/Close Motor (M7) has been driven for 0.15 seconds.


Solutions :
1.Replace the Grip Arm Sensor (S13).
2.Replace the Gripper Open/Close Motor (M7).
3.Replace the Finisher Controller PCB (PCB1).




Please remember, not every error is entirely identical. What treats the condition one time might not exactly remedy it the next occasion. While the help and advice in this text comes from the service manual and most often ought to get your unit operating, at times other things might be in play.

If you’re looking at this document and have knowledge about this malfunction and want to contribute please be sure to leave a comment down the page. Or, if you have read this article and have further questions then ask. If I have exposure to the situation then I will answer.

We will be happy to hear your thoughts

Leave a reply

Shopping cart