Canon imageRUNNER 2545 E567 0002 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2545 E567 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 2545 E567 0002 Error Code
E567 0002
Description :
Causes :
The shift roller does not return to the shift roller release home position when the Shift Roller Release Motor (M5) has been driven for 0.06 sec.
Solutions :
1.Replace the Shift Roller Release Sensor (S3).
2.Replace the Shift Roller Release Motor (M5).
3.Replace the Finisher Controller PCB (PCB1).
Please remember, not every error is entirely the same. What remedies the complication one time might not eliminate it the next time. While the info in this posting is taken from the service manual and typically should get your equipment ready to go, in some cases other things may be in play.
If you’re looking at this document and have knowledge of this error message and want to share be sure to leave a comment beneath. Or, if you have read this article and have more questions then ask. If I have information about the problem then I will respond.
