Canon imageRUNNER 2545 E542 0005 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2545 E542 0005 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 2545 E542 0005 Error Code
E542 0005
Description :
Causes :
The FG input cannot be detected when the Additional Tray Lift Motor (M12) has been driven for 0.1 second.
Solutions :
1.Replace the Additional Tray Clock Sensor (S23).
2.Replace the Additional Tray Lift Motor (M12)
3.Replace the Finisher Controller PCB (PCB1).
Please remember, not every error is entirely the same. What treats the complication one occasion may not fix it the next occasion. While the ideas in this page comes from the service manual and oftentimes should get your machine operating, now and again other causes might be in play.
If you’re looking at this page and have experience with this fault and would like to make a contribution please make sure to leave a comment down below. Or, if you have read this article and have more questions then ask. If I have exposure to the difficulty then I will reply.