Canon imageRUNNER 2545 E532 0002 Error Code

 

Canon imageRUNNER 2545 E532 0002 Error Code Instructions

Below you will find the service manual information for the Canon imageRUNNER 2545 E532 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon imageRUNNER 2545 E532 0002 Error Code

Service Manual Instructions for the Canon imageRUNNER 2545 E532 0002 Error Code

E532 0002
Description :

Causes :
The stapler does not return to the stapler move home position when the STP Move Motor (M1) has been driven for 2.8 sec.


Solutions :
1.Replace the Stapler Move HP Sensor (S10).
2.Check the wiring between the Finisher Controller PCB and the STP Move Motor.
3.Check the stapler shift base.
4.Replace the STP Move Motor (M1).
5.Replace the Finisher Controller PCB (PCB1).


Please remember, not every error is exactly alike. What remedies the problem one time might not exactly get rid of it the next occasion. While the material in this page hails from the service manual and usually ought to get your machine operating, in some cases other reasons may be in play.

If you’re looking at this page and have exposure to this error and would wish to contribute you should leave a comment underneath. Or, if you have read this article and have further questions then ask. If I have exposure to the issue then I will answer back.

We will be happy to hear your thoughts

Leave a reply

Shopping cart