Canon imageRUNNER 2545 E110 0002 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2545 E110 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 2545 E110 0002 Error Code
E110 0002
Description :
Causes :
The speed lock signal indicates a deviation 10 times in sequence at intervals of 100 msec after the signal has indicated a locked state.
* The same condition is detected after the error retry is performed.
Solutions :
1.Check the cable.
2.Replace the Laser Scanner Unit.
3.Replace the DC Controller PCB (PCB4).
Please remember, not every error is totally identical. What remedies the difficulty one time might not exactly get rid of it the next time. While the tips in this posting originates from the service manual and typically ought to get your piece of equipment ready to go, in some cases other reasons might be in play.
If you’re looking at this piece of content and have information about this fault and wish to contribute you should leave a comment underneath. Or, if you have read this article and have more questions then ask. If I have knowledge about the trouble then I will respond.
