Canon imageRUNNER 2545 E010 0002 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2545 E010 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 2545 E010 0002 Error Code
E010 0002
Description :
Causes :
During motor rotation, detection is executed every 100 msec; however, the drive signal is absent 5 times in sequence.
Solutions :
1.Replace the Main Motor (M1).
2.Replace the DC Controller PCB (PCB4).
Realize, not every error is absolutely the same. What corrects the problem one time may not remedy it the next time. While the tips in this document is taken from the service manual and most likely should get your machine ready to go, in some cases additional factors might be in play.
If you’re looking at this post and have expertise in this malfunction and desire to contribute please be sure to leave a comment underneath. Or, if you have read this article and have more questions then ask. If I have exposure to the trouble then I will respond.
