Canon imageRUNNER 2545 E001 0002 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2545 E001 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 2545 E001 0002 Error Code
E001 0002
Description :
Causes :
The reading of the sub thermistor is 295 deg C or more continuously for 200 msec.
Solutions :
1.Go through the following to clear the error: CLEAR > ENGIN > ERRCLR; and then turn OFF and then ON the power.
2.Check connection of the Connectors (Thermistor Connector and AC Connector).
3.Replace the Fixing Main Thermistor (Film Unit).
4.Replace the Fixing Assembly.
5.Replace the DC Controller PCB (PCB4).
Realize, not every error is completely identical. What fixes the trouble one time may not resolve it the next time. While the specifics in this text is inspired by the service manual and most often should get your unit functioning, in some cases additional variables might be in play.
If you’re looking at this post and have information about this error message and want to share make sure you leave a comment down below. Or, if you have read this article and have more questions then ask. If I have information about the trouble then I will answer.
