Canon imageRUNNER 2545 E001 0000 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2545 E001 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 2545 E001 0000 Error Code
E001 0000
Description :
Causes :
The reading of the main thermistor is 250 deg C or more continuously for 200 msec.
Solutions :
1.Go through the following to clear the error: CLEAR > ENGIN > ERRCLR; and then turn OFF and then ON the power.
2.Check connection of the Connectors (Thermistor Connector and AC Connector).
3.Replace the Fixing Main Thermistor (Film Unit).
4.Replace the Fixing Assembly.
5.Replace the DC Controller PCB (PCB4).
Realize, not every error is completely identical. What treats the condition one occasion might not get rid of it the next occasion. While the advice in this posting originates from the service manual and oftentimes should get your unit functioning, in some cases other elements could possibly be in play.
If you’re looking at this post and have knowledge about this error and wish to share please leave a comment down the page. Or, if you have read this article and have further questions then ask. If I have information about the difficulty then I will respond.
