Canon imageRUNNER 2535I E805 0002 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2535I E805 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 2535I E805 0002 Error Code
E805 0002
Description :
Causes :
When lock signal is detected for 5 sec while the Exhaust Fan (Front) (FAN4) is stopped
* The same condition is detected after the error retry is performed.
Solutions :
1.Disconnect and then connect the connector (J206) on the DC Controller PCB (PCB4).
2.Replace the Exhaust Fan (Front) (FAN4).
3.Replace the DC Controller PCB (PCB4).
Realize, not every error is completely the same. What remedies the situation one occasion may possibly not get rid of it the next occasion. While the data in this post is obtained from the service manual and most often ought to get your machine operational, occasionally other factors may be in play.
If you’re looking at this post and have knowledge about this problem and desire to share please be sure to leave a comment down the page. Or, if you have read this article and have further questions then ask. If I have knowledge about the problem then I will reply.
