Canon imageRUNNER 2535I E716 0010 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2535I E716 0010 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 2535I E716 0010 Error Code
E716 0010
Description :
Causes :
When the communication with the 2-way unit is faulty after detecting the connection with the finisher.
Solutions :
1.Install the 2-way unit.
2.Check the cable.
3.Replace the DC Controller PCB (PCB4).
4.Replace the 2-way unit driver PCB.
Realize, not every error is entirely the same. What corrects the problem one time will possibly not resolve it the next time. While the material in this blog post is taken from the service manual and usually ought to get your unit functioning, at times other causes can be in play.
If you’re looking at this short article and have exposure to this problem and desire to contribute be sure to leave a comment down the page. Or, if you have read this article and have further questions then ask. If I have knowledge about the situation then I will reply.
