Canon imageRUNNER 2535I E571 0002 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2535I E571 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 2535I E571 0002 Error Code
E571 0002
Description :
Causes :
The gripper unit does not return to the gripper unit home position when the Gripper Open/Close Motor (M7) has been driven for 0.15 seconds.
Solutions :
1.Replace the Grip Arm Sensor (S13).
2.Replace the Gripper Open/Close Motor (M7).
3.Replace the Finisher Controller PCB (PCB1).
Realize, not every error is exactly identical. What treats the difficulty one time might not exactly get rid of it the next time. While the help and advice in this blog post obtain from the service manual and in most cases should get your machine functioning, at times other elements could possibly be in play.
If you’re looking at this short article and have knowledge of this error and wish to share please leave a comment below. Or, if you have read this article and have additional questions then ask. If I have exposure to the issue then I will respond.
