Canon imageRUNNER 2535I E567 0001 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2535I E567 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 2535I E567 0001 Error Code
E567 0001
Description :
Causes :
The shift roller does not leave the shift roller release home position when the Shift Roller
Release Motor (M5) has been driven for 0.1 sec.
Solutions :
1.Replace the Shift Roller Release Sensor (S3).
2.Replace the Shift Roller Release Motor (M5).
3.Replace the Finisher Controller PCB (PCB1).
Realize, not every error is precisely alike. What corrects the problem one occasion may possibly not solve it the next time. While the tips in this blog post is taken from the service manual and usually should get your device operating, at times other elements can be in play.
If you’re looking at this short article and have knowledge of this malfunction and want to share you should leave a comment underneath. Or, if you have read this article and have more questions then ask. If I have information about the trouble then I will answer back.
