Canon imageRUNNER 2535I E540 0001 Error Code

 

Canon imageRUNNER 2535I E540 0001 Error Code Instructions

Below you will find the service manual information for the Canon imageRUNNER 2535I E540 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon imageRUNNER 2535I E540 0001 Error Code

Service Manual Instructions for the Canon imageRUNNER 2535I E540 0001 Error Code

E540 0001
Description :

Causes :
The stack tray does not move within a specified time period.


Solutions :
1.Replace the Tray Lift Motor (M11).
2.Replace the Finisher Controller PCB (PCB1).





Realize, not every error is precisely identical. What remedies the condition one occasion may not fix it the next occasion. While the advice in this post hails from the service manual and typically ought to get your piece of equipment ready to go, on occasion other variables could possibly be in play.

If you’re looking at this write-up and have experience with this problem and wish to make a contribution be sure to leave a comment down the page. Or, if you have read this article and have further questions then ask. If I have exposure to the problem then I will respond.

We will be happy to hear your thoughts

Leave a reply

Shopping cart