Canon imageRUNNER 2535I E532 0002 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2535I E532 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 2535I E532 0002 Error Code
E532 0002
Description :
Causes :
The stapler does not return to the stapler move home position when the STP Move Motor (M1) has been driven for 2.8 sec.
Solutions :
1.Replace the Stapler Move HP Sensor (S10).
2.Check the wiring between the Finisher Controller PCB and the STP Move Motor.
3.Check the stapler shift base.
4.Replace the STP Move Motor (M1).
5.Replace the Finisher Controller PCB (PCB1).
Realize, not every error is precisely identical. What treats the condition one time will possibly not take care of it the next time. While the data in this blog post is obtained from the service manual and normally should get your machine ready to go, sometimes additional variables could possibly be in play.
If you’re looking at this write-up and have expertise in this error message and desire to make a contribution please be sure to leave a comment down below. Or, if you have read this article and have more questions then ask. If I have exposure to the trouble then I will reply.
