Canon imageRUNNER 2535I E531 8001 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2535I E531 8001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 2535I E531 8001 Error Code
E531 8001
Description :
Causes :
The stapler does not leave the staple home position when the Staple Motor (M10) has been driven for 0.5 sec.
Solutions :
1.Check the wiring between the Finisher Controller PCB and Stapler.
2.Replace the Stapler.
3.Replace the Finisher Controller PCB (PCB1).
Realize, not every error is simply alike. What fixes the issue one time will possibly not resolve it the next occasion. While the guidance in this written piece originates from the service manual and in most cases ought to get your equipment operational, sometimes other things may be in play.
If you’re looking at this write-up and have expertise in this fault and want to share please make sure to leave a comment down below. Or, if you have read this article and have more questions then ask. If I have information about the problem then I will answer back.
