Canon imageRUNNER 2535I E280 0000 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2535I E280 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 2535I E280 0000 Error Code
E280 0000
Description :
Causes :
Reading error after writing.
Solutions :
1.Disconnect and then connect the flexible cable(Relay PCB (PCB2)-Main Controller PCB (PCB1) 50pin).
2.Disconnect and then connect the flexible cable(Relay PCB (PCB2)-Main Controller PCB (PCB1) 64pin).
3.Disconnect and then connect the flexible cable(CCD unit- Relay PCB (PCB2)).
4.Replace the flexible cable.
5.Replace the Relay PCB (PCB2).
6.Replace the Main Controller PCB (PCB1).
Realize, not every error is simply alike. What treats the trouble one occasion might not exactly resolve it the next time. While the details in this written piece comes from the service manual and most often should get your machine up and running, in some cases other variables might be in play.
If you’re looking at this write-up and have exposure to this problem and want to make a contribution please be sure to leave a comment down the page. Or, if you have read this article and have further questions then ask. If I have exposure to the difficulty then I will reply.
