Canon imageRUNNER 2535I E240 0000 Error Code

 

Canon imageRUNNER 2535I E240 0000 Error Code Instructions

Below you will find the service manual information for the Canon imageRUNNER 2535I E240 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon imageRUNNER 2535I E240 0000 Error Code

Service Manual Instructions for the Canon imageRUNNER 2535I E240 0000 Error Code

E240 0000
Description :

Causes :
The serial communication error such as parity error or overrun error is constantly detected.


Solutions :
1.Check the Connectors.
2.Replace the DC Controller PCB (PCB4).





Realize, not every error is simply the same. What treats the trouble one time may possibly not eliminate it the next time. While the guidance in this writing hails from the service manual and most often ought to get your equipment ready to go, at times additional factors might be in play.

If you’re looking at this write-up and have knowledge about this error and would wish to contribute be sure to leave a comment beneath. Or, if you have read this article and have additional questions then ask. If I have experience with the trouble then I will respond.

We will be happy to hear your thoughts

Leave a reply

Shopping cart