Canon imageRUNNER 2535I E004 0000 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2535I E004 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 2535I E004 0000 Error Code
E004 0000
Description :
Causes :
When disconnection is detected with connector (J214) for 30 sec continuously.
Solutions :
1.Check connection of the Connector (J214).
2.Replace the Film Unit.
3.Replace the Fixing Assembly.
4.Replace the DC Controller PCB (PCB4).
Remember that, not every error is absolutely the same. What treats the condition one occasion might not resolve it the next time. While the guidance in this writing is taken from the service manual and typically should get your product operating, now and again additional circumstances can be in play.
If you’re looking over this blog post and have experience with this malfunction and desire to share please be sure to leave a comment underneath. Or, if you have read this article and have further questions then ask. If I have exposure to the situation then I will reply.
