Canon imageRUNNER 2535I E001 0002 Error Code

 

Canon imageRUNNER 2535I E001 0002 Error Code Instructions

Below you will find the service manual information for the Canon imageRUNNER 2535I E001 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon imageRUNNER 2535I E001 0002 Error Code

Service Manual Instructions for the Canon imageRUNNER 2535I E001 0002 Error Code

E001 0002
Description :

Causes :
The reading of the sub thermistor is 295 deg C or more continuously for 200 msec.


Solutions :
1.Go through the following to clear the error: CLEAR > ENGIN > ERRCLR; and then turn OFF and then ON the power.
2.Check connection of the Connectors (Thermistor Connector and AC Connector).
3.Replace the Fixing Main Thermistor (Film Unit).
4.Replace the Fixing Assembly.
5.Replace the DC Controller PCB (PCB4).


Remember that, not every error is completely alike. What remedies the condition one occasion might not exactly eliminate it the next occasion. While the ideas in this short article derives from the service manual and usually ought to get your machine working, in some cases other elements might be in play.

If you’re looking over this blog post and have experience with this problem and wish to contribute please make sure to leave a comment underneath. Or, if you have read this article and have more questions then ask. If I have experience with the difficulty then I will answer.

We will be happy to hear your thoughts

Leave a reply

Shopping cart