Canon imageRUNNER 2535 E805 0003 Error Code

 

Canon imageRUNNER 2535 E805 0003 Error Code Instructions

Below you will find the service manual information for the Canon imageRUNNER 2535 E805 0003 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon imageRUNNER 2535 E805 0003 Error Code

Service Manual Instructions for the Canon imageRUNNER 2535 E805 0003 Error Code

E805 0003
Description :

Causes :
When lock signal failed to be detected for 5 sec while the Exhaust Fan (Front) (FAN4) is driven
* The same condition is detected after the error retry is performed.

Solutions :
1.Disconnect and then connect the connector (J206) on the DC Controller PCB (PCB4).
2.Replace the Exhaust Fan (Front) (FAN4).
3.Replace the DC Controller PCB (PCB4).




Remember that, not every error is completely identical. What corrects the problem one occasion may possibly not resolve it the next occasion. While the tips in this write-up obtain from the service manual and most often ought to get your piece of equipment working, sometimes other causes could possibly be in play.

If you’re looking over this blog post and have expertise in this error message and want to make a contribution make sure you leave a comment down the page. Or, if you have read this article and have more questions then ask. If I have information about the difficulty then I will answer.

We will be happy to hear your thoughts

Leave a reply

Shopping cart