Canon imageRUNNER 2535 E805 0000 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2535 E805 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 2535 E805 0000 Error Code
E805 0000
Description :
Causes :
When lock signal is detected for 5 sec while the Exhaust Fan (Rear) (FAN3) is stopped.|* The same condition is detected after the error retry is performed.
Solutions :
1.Disconnect and then connect the connector (J206) on the DC Controller PCB (PCB4).
2.Replace the Exhaust Fan (Rear) (FAN3).
3.Replace the DC Controller PCB (PCB4).
Remember that, not every error is completely identical. What remedies the issue one time might not exactly get rid of it the next occasion. While the ideas in this text comes from the service manual and in most cases ought to get your unit up and running, now and again other variables can be in play.
If you’re looking over this blog post and have exposure to this error and wish to contribute you should leave a comment below. Or, if you have read this article and have additional questions then ask. If I have knowledge about the trouble then I will answer back.
