Canon imageRUNNER 2535 E804 0001 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2535 E804 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 2535 E804 0001 Error Code
E804 0001
Description :
Causes :
When lock signal failed to be detected for 5 sec while the Power Supply Cooloing Fan (FAN6) is driven.
* The same condition is detected after the error retry is performed.
Solutions :
1.Disconnect and then connect the connector (J205) on the DC Controller PCB (PCB4).
2.Replace the Power Supply Cooloing Fan (FAN6).
3.Replace the DC Controller PCB (PCB4).
Remember that, not every error is completely identical. What treats the complication one occasion will possibly not remedy it the next occasion. While the data in this posting comes from the service manual and generally should get your piece of equipment functioning, at times other things could possibly be in play.
If you’re looking over this blog post and have exposure to this fault and desire to contribute please leave a comment below. Or, if you have read this article and have additional questions then ask. If I have exposure to the trouble then I will reply.
