Canon imageRUNNER 2535 E575 0002 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2535 E575 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 2535 E575 0002 Error Code
E575 0002
Description :
Causes :
The gripper unit does not return to the gripper unit home position when the Gripper Unit Move Motor (M2) has been driven for 0.1 seconds.
Solutions :
1.Replace the Gripper Unit HP Sensor (S7).
2.Replace the Gripper Unit Move Motor (M2).
3.Replace the Finisher Controller PCB (PCB1).
Remember that, not every error is entirely the same. What fixes the difficulty one occasion may possibly not fix it the next time. While the details in this posting derives from the service manual and usually ought to get your machine up and running, now and again other things might be in play.
If you’re looking over this blog post and have knowledge of this problem and would like to share be sure to leave a comment underneath. Or, if you have read this article and have additional questions then ask. If I have experience with the trouble then I will answer.
