Canon imageRUNNER 2535 E567 0001 Error Code

 

Canon imageRUNNER 2535 E567 0001 Error Code Instructions

Below you will find the service manual information for the Canon imageRUNNER 2535 E567 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon imageRUNNER 2535 E567 0001 Error Code

Service Manual Instructions for the Canon imageRUNNER 2535 E567 0001 Error Code

E567 0001
Description :

Causes :
The shift roller does not leave the shift roller release home position when the Shift Roller
Release Motor (M5) has been driven for 0.1 sec.

Solutions :
1.Replace the Shift Roller Release Sensor (S3).
2.Replace the Shift Roller Release Motor (M5).
3.Replace the Finisher Controller PCB (PCB1).




Remember that, not every error is entirely the same. What remedies the problem one time might not take care of it the next occasion. While the info in this post is taken from the service manual and most likely should get your machine operating, occasionally additional variables could possibly be in play.

If you’re looking over this document and have exposure to this fault and would like to contribute be sure to leave a comment down below. Or, if you have read this article and have further questions then ask. If I have experience with the issue then I will respond.

We will be happy to hear your thoughts

Leave a reply

Shopping cart