Canon imageRUNNER 2535 E520 0001 Error Code

 

Canon imageRUNNER 2535 E520 0001 Error Code Instructions

Below you will find the service manual information for the Canon imageRUNNER 2535 E520 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon imageRUNNER 2535 E520 0001 Error Code

Service Manual Instructions for the Canon imageRUNNER 2535 E520 0001 Error Code

E520 0001
Description :

Causes :
The shift roller does not leave the shift roller home position when the Shift Motor (M4) has been driven for 1.2 seconds.


Solutions :
1.Replace the Shift Roller HP Sensor (S2).
2.Replace the Shift Motor (M4).
3.Replace the Finisher Controller PCB (PCB1).




Remember that, not every error is exactly identical. What treats the problem one occasion will possibly not get rid of it the next time. While the tips in this written piece hails from the service manual and in most cases ought to get your piece of equipment up and running, occasionally additional factors might be in play.

If you’re looking over this document and have knowledge about this problem and would like to contribute make sure you leave a comment down below. Or, if you have read this article and have further questions then ask. If I have exposure to the difficulty then I will reply.

We will be happy to hear your thoughts

Leave a reply

Shopping cart