Canon imageRUNNER 2535 E202 0000 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2535 E202 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 2535 E202 0000 Error Code
E202 0000
Description :
Causes :
1.The attempt to detect the home position fails when the CCD is moved forward.
2.The attempt to detect the home position fails when the CCD is moved back.
Solutions :
1.Disconnect and then connect the flexible cable(Relay PCB (PCB2)-Main Controller PCB (PCB1) 64pin).
2.Replace the flexible cable.
3.Replace the CCD HP sensor (S22).
4.Replace the Scanner Motor (M21).
5.Replace the Relay PCB (PCB2).
6.Replace the Main Controller PCB (PCB1).
Remember that, not every error is precisely the same. What corrects the situation one occasion might not remedy it the next time. While the material in this posting hails from the service manual and oftentimes ought to get your equipment up and running, occasionally other elements may be in play.
If you’re looking over this page and have exposure to this error and would like to contribute please make sure to leave a comment below. Or, if you have read this article and have more questions then ask. If I have experience with the difficulty then I will reply.
