Canon imageRUNNER 2535 E025 0000 Error Code

 

Canon imageRUNNER 2535 E025 0000 Error Code Instructions

Below you will find the service manual information for the Canon imageRUNNER 2535 E025 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon imageRUNNER 2535 E025 0000 Error Code

Service Manual Instructions for the Canon imageRUNNER 2535 E025 0000 Error Code

E025 0000
Description :

Causes :
The Sub Hopper Toner Sensor (TS2) connection detection signal is absent for 100 msec 10 times in sequence.
* Error occurs after the delivery if a paper in passage exists.

Solutions :
1.Check connection of the Connector (J207).
2.Replace the Sub Hopper Toner Sensor (TS2).
3.Replace the DC Controller PCB (PCB4).




Remember that, not every error is simply the same. What fixes the condition one time may not solve it the next occasion. While the details in this write-up is taken from the service manual and generally should get your product up and running, at times additional variables might be in play.

If you’re looking over this page and have knowledge of this fault and wish to make a contribution you should leave a comment down the page. Or, if you have read this article and have additional questions then ask. If I have information about the difficulty then I will reply.

We will be happy to hear your thoughts

Leave a reply

Shopping cart