Canon imageRUNNER 2535 E010 0002 Error Code

 

Canon imageRUNNER 2535 E010 0002 Error Code Instructions

Below you will find the service manual information for the Canon imageRUNNER 2535 E010 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon imageRUNNER 2535 E010 0002 Error Code

Service Manual Instructions for the Canon imageRUNNER 2535 E010 0002 Error Code

E010 0002
Description :

Causes :
During motor rotation, detection is executed every 100 msec; however, the drive signal is absent 5 times in sequence.


Solutions :
1.Replace the Main Motor (M1).
2.Replace the DC Controller PCB (PCB4).





Remember that, not every error is totally the same. What remedies the problem one occasion might not resolve it the next time. While the information in this page is inspired by the service manual and most often ought to get your machine operating, from time to time other factors may be in play.

If you’re looking over this piece of content and have expertise in this error and desire to contribute please make sure to leave a comment below. Or, if you have read this article and have more questions then ask. If I have exposure to the problem then I will answer back.

We will be happy to hear your thoughts

Leave a reply

Shopping cart