Canon imageRUNNER 2535 E002 0000 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2535 E002 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 2535 E002 0000 Error Code
E002 0000
Description :
Causes :
1.The reading of the main thermistor is less than 115 deg C continuously for 400 msec 1.3 sec after it has indicated 100 deg C.
2.The reading of the main thermistor is less than 150 deg C continuously for 400 msec 1.3 sec after it has indicated 140 deg C.
Solutions :
1.Go through the following to clear the error: CLEAR > ENGIN > ERRCLR; and then turn OFF and then ON the power.
2.Check connection of the Connectors (Thermistor Connector and AC Connector).
3.Replace the Fixing Main Thermistor (Film Unit).
4.Replace the Fixing Assembly.
5.Replace the DC Controller PCB (PCB4).
Remember, not every error is absolutely identical. What corrects the situation one occasion might not exactly eliminate it the next time. While the specifics in this short article derives from the service manual and in most cases ought to get your equipment functioning, from time to time other elements might be in play.
If you’re looking over this piece of content and have exposure to this error message and would wish to make a contribution please be sure to leave a comment underneath. Or, if you have read this article and have more questions then ask. If I have exposure to the difficulty then I will answer back.
