Canon imageRUNNER 2022 E003 0001 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2022 E003 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 2022 E003 0001 Error Code
E003 0001
Description :
Abnormally low temperature (detected by sub thermistor)
Causes :
After the temperature detected by the sub thermistor has reached the specified value, it does not reach the specified value during initial rotation.
Solutions :
Check the connector of the fixing film unit.
Replace the fixing film unit.
Replace the DC controller PCB.
Canon FM0-0160-000 Fuser (Fixing) Unit – 120 Volt (Genuine) – $314.95
Canon imageRUNNER 2022 Fuser Removal and Replacement FM0-0160-000, FM3-3651-000
Try to remember, not every error is totally the same. What corrects the problem one occasion might not exactly get rid of it the next time. While the details in this write-up is inspired by the service manual and normally should get your device up and running, sometimes additional circumstances could possibly be in play.
If you are looking over this piece of content and have information about this problem and would wish to share please be sure to leave a comment underneath. Or, if you have read this article and have more questions then ask. If I have exposure to the difficulty then I will answer back.
