Canon imageRUNNER 1750iF E822 0004 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 1750iF E822 0004 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 1750iF E822 0004 Error Code
E822 0004
Description :
Delivery Cooling Fan (Rear) (FM1) error
Causes :
A lock signal was detected for 5 seconds while the Delivery Cooling Fan (Rear) (FM1) was being driven.
The same status was detected again after executing an error retry.
Solutions :
1. Disconnect and then connect the connector (J210) on the DC Controller PCB (PCB1) to check the connection.
2. Replace the Delivery Cooling Fan (Rear) (FM1).
3. Replace the DC Controller PCB (PCB1).
Make sure you remember, not every error is totally the same. What fixes the problem one occasion will possibly not resolve it the next occasion. While the details in this written piece obtain from the service manual and in most cases should get your equipment up and running, sometimes other reasons may be in play.
If you are reading this post and have knowledge of this malfunction and would wish to share please make sure to leave a comment down the page. Or, if you have read this article and have more questions then ask. If I have exposure to the problem then I will reply.
