Canon imageRUNNER 1750iF E804 0001 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 1750iF E804 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 1750iF E804 0001 Error Code
E804 0001
Description :
Error in rotation of the Power Supply Cooling Fan (FM4)
Causes :
A lock signal could not be detected for 5 seconds while the Power Supply Cooling Fan (FM4) was being driven.
The same status was detected again after executing an error retry.
Solutions :
1. Disconnect and then connect the connector (J209) on the DC Controller PCB (PCB1) to check the connection.
2. Replace the Power Supply Cooling Fan (FM4).
3. Replace the DC Controller PCB (PCB1).
Make sure you remember, not every error is simply identical. What remedies the difficulty one occasion may not resolve it the next time. While the content in this blog post is taken from the service manual and oftentimes ought to get your unit ready to go, sometimes other factors could possibly be in play.
If you are reading this post and have expertise in this problem and want to share please make sure to leave a comment beneath. Or, if you have read this article and have additional questions then ask. If I have information about the problem then I will reply.
