Canon imageRUNNER 1750iF E577 8002 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 1750iF E577 8002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 1750iF E577 8002 Error Code
E577 8002
Description :
Paddle Motor (M3) error
Causes :
The Paddle Motor (M3) was driven for 2 seconds, but the Paddle could not be detected by the Paddle HP Sensor (S3).
Solutions :
1. Check the connector connection of the Paddle HP Sensor (S3) or the Paddle Motor (M3).
2. Check for open circuit of the Harness of the Paddle HP Sensor (S3) or the Paddle Motor (M3).
3. Replace the Paddle HP Sensor (S3).
4. Replace the Paddle Motor (M3).
5. Replace the Finisher Controller PCB.
Make sure you remember, not every error is precisely the same. What treats the malfunction one occasion might not fix it the next time. While the data in this post originates from the service manual and normally ought to get your product ready to go, in some cases additional variables may be in play.
If you are reading this post and have experience with this error message and would like to contribute you should leave a comment underneath. Or, if you have read this article and have further questions then ask. If I have exposure to the difficulty then I will respond.
