Canon imageRUNNER 1750iF E261 0000 Error Code

 

Canon imageRUNNER 1750iF E261 0000 Error Code Instructions

Below you will find the service manual information for the Canon imageRUNNER 1750iF E261 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon imageRUNNER 1750iF E261 0000 Error Code

Service Manual Instructions for the Canon imageRUNNER 1750iF E261 0000 Error Code

E261 0000
Description :
Zero cross signal error

Causes :
When the relay is ON, the zero cross signal failed to be detected for 500 msec or longer.
When the same status was detected again after executing an error retry.

Solutions :
1. Check the connector connection. (All connectors on the DC Controller PCB)
2. Replace the DC Controller PCB (PCB1).




Make sure you remember, not every error is exactly alike. What fixes the issue one occasion might not exactly remedy it the next occasion. While the material in this piece of content is taken from the service manual and most often ought to get your machine operating, now and again other elements can be in play.

If you are reading this piece of content and have expertise in this malfunction and wish to make a contribution please make sure to leave a comment below. Or, if you have read this article and have further questions then ask. If I have experience with the difficulty then I will reply.

We will be happy to hear your thoughts

Leave a reply

Shopping cart