Canon imageRUNNER 1750iF E013 0001 Error Code

 

Canon imageRUNNER 1750iF E013 0001 Error Code Instructions

Below you will find the service manual information for the Canon imageRUNNER 1750iF E013 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon imageRUNNER 1750iF E013 0001 Error Code

Service Manual Instructions for the Canon imageRUNNER 1750iF E013 0001 Error Code

E013 0001
Description :
Error in rotation of Waste Toner Motor (M3)

Causes :
Lock detection flag was monitored every 2msec, and the same level was detected 600 times in a row.

Solutions :
1. Check the connector connection between the Waste Toner Motor and the DC Controller PCB (J209).
2. Replace the Waste Toner Motor (M3).
3. Replace the DC Controller PCB (PCB1).



Make sure you remember, not every error is absolutely the same. What corrects the trouble one occasion might not exactly remedy it the next time. While the help and advice in this piece of content is obtained from the service manual and in most cases should get your equipment working, in some cases other factors can be in play.

If you are reading this page and have experience with this malfunction and want to contribute please leave a comment underneath. Or, if you have read this article and have more questions then ask. If I have experience with the situation then I will reply.

We will be happy to hear your thoughts

Leave a reply

Shopping cart