Canon imageRUNNER 1750 E577 8002 Error Code

 

Canon imageRUNNER 1750 E577 8002 Error Code Instructions

Below you will find the service manual information for the Canon imageRUNNER 1750 E577 8002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon imageRUNNER 1750 E577 8002 Error Code

Service Manual Instructions for the Canon imageRUNNER 1750 E577 8002 Error Code

E577 8002
Description :
Paddle Motor (M3) error

Causes :
The Paddle Motor (M3) was driven for 2 seconds, but the Paddle could not be detected by the Paddle HP Sensor (S3).

Solutions :
1. Check the connector connection of the Paddle HP Sensor (S3) or the Paddle Motor (M3).
2. Check for open circuit of the Harness of the Paddle HP Sensor (S3) or the Paddle Motor (M3).
3. Replace the Paddle HP Sensor (S3).
4. Replace the Paddle Motor (M3).
5. Replace the Finisher Controller PCB.


Keep in mind, not every error is entirely the same. What treats the condition one time may possibly not eliminate it the next time. While the ideas in this post originates from the service manual and in most cases ought to get your unit working, at times additional factors might be in play.

If you are reading this blog post and have knowledge about this malfunction and desire to make a contribution please be sure to leave a comment beneath. Or, if you have read this article and have more questions then ask. If I have information about the difficulty then I will respond.

We will be happy to hear your thoughts

Leave a reply

Shopping cart