Canon imageRUNNER 1750 E202 0000 Error Code

 

Canon imageRUNNER 1750 E202 0000 Error Code Instructions

Below you will find the service manual information for the Canon imageRUNNER 1750 E202 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon imageRUNNER 1750 E202 0000 Error Code

Service Manual Instructions for the Canon imageRUNNER 1750 E202 0000 Error Code

E202 0000
Description :
CIS home position detection error

Causes :
1. Error when moving to the left side for HP check operation
2. Error when moving to the right side for HP check operation

Solutions :
1. Disconnect and then connect the Flexible Cable (Reader Controller PCB (PCB3) – Main Controller PCB (PCB2) 31pin).
2. Replace the Flexible Cable.
3. Replace the CIS HP Sensor (PS24).
4. Replace the Reader Motor (M10).
5. Replace the Reader Controller PCB (PCB3).
6. Replace the Main Controller PCB (PCB2).


Keep in mind, not every error is absolutely alike. What fixes the condition one occasion might not exactly fix it the next time. While the help and advice in this posting is taken from the service manual and generally should get your piece of equipment up and running, from time to time other things might be in play.

If you are reading this article and have exposure to this error and wish to share you should leave a comment down the page. Or, if you have read this article and have additional questions then ask. If I have knowledge about the situation then I will answer.

We will be happy to hear your thoughts

Leave a reply

Shopping cart