Canon imageRUNNER 1750 E197 0001 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 1750 E197 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 1750 E197 0001 Error Code
E197 0001
Description :
Laser Driver PCB communication error
Causes :
Error in communication with the Laser Driver PCB (serial communication failure)
Solutions :
1. Check the Laser Scanner Unit connector.
2. Replace the Laser Scanner Unit.
3. Replace the DC Controller PCB (PCB1).
Just remember, not every error is totally the same. What remedies the problem one occasion will possibly not take care of it the next occasion. While the tips in this writing originates from the service manual and normally should get your unit operating, at times other elements might be in play.
If you are reading this article and have expertise in this problem and wish to share make sure you leave a comment down the page. Or, if you have read this article and have further questions then ask. If I have knowledge about the problem then I will answer back.
