Canon imageRUNNER 1750 E110 0002 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 1750 E110 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 1750 E110 0002 Error Code
E110 0002
Description :
Laser Scanner Motor error
Causes :
After the speed lock of the Laser Scanner Motor had been settled, the speed lock signals showed unlocked status 10 times in a row at intervals of 100 msec.
When the same status was detected again after executing an error retry.
Solutions :
1. Check the Laser Scanner Unit connector.
2. Replace the Laser Scanner Unit.
3. Replace the DC Controller PCB (PCB1).
Just remember, not every error is simply the same. What treats the situation one occasion may possibly not get rid of it the next occasion. While the content in this posting obtain from the service manual and most likely should get your product operating, from time to time additional variables can be in play.
If you are looking over this write-up and have knowledge of this problem and desire to make a contribution be sure to leave a comment down the page. Or, if you have read this article and have more questions then ask. If I have exposure to the situation then I will answer.
