Canon imageRUNNER 1750 E013 0001 Error Code

 

Canon imageRUNNER 1750 E013 0001 Error Code Instructions

Below you will find the service manual information for the Canon imageRUNNER 1750 E013 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon imageRUNNER 1750 E013 0001 Error Code

Service Manual Instructions for the Canon imageRUNNER 1750 E013 0001 Error Code

E013 0001
Description :
Error in rotation of Waste Toner Motor (M3)

Causes :
Lock detection flag was monitored every 2msec, and the same level was detected 600 times in a row.

Solutions :
1. Check the connector connection between the Waste Toner Motor and the DC Controller PCB (J209).
2. Replace the Waste Toner Motor (M3).
3. Replace the DC Controller PCB (PCB1).



Just remember, not every error is simply alike. What treats the issue one time may not fix it the next time. While the content in this short article comes from the service manual and typically should get your product working, sometimes additional factors might be in play.

If you are looking over this write-up and have exposure to this fault and would wish to contribute please be sure to leave a comment underneath. Or, if you have read this article and have more questions then ask. If I have information about the situation then I will respond.

We will be happy to hear your thoughts

Leave a reply

Shopping cart