Canon imageRUNNER 1750 E010 0001 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 1750 E010 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 1750 E010 0001 Error Code
E010 0001
Description :
Main Motor (M2) rotation error
Causes :
Detection was performed every 100 msec since the start of drive and there had been no lock detection signal in 2 seconds.
Solutions :
1. Check the connector between the Main Motor and the DC Controller PCB (J203).
2. Replace the Main Motor (M2).
3. Replace the DC Controller PCB (PCB1).
Just remember, not every error is simply alike. What fixes the complication one occasion may possibly not fix it the next time. While the content in this posting derives from the service manual and normally should get your product working, occasionally other elements could possibly be in play.
If you are looking over this write-up and have expertise in this problem and desire to make a contribution be sure to leave a comment down below. Or, if you have read this article and have more questions then ask. If I have information about the problem then I will answer.
