Canon imageRUNNER 1740iF E010 0002 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 1740iF E010 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 1740iF E010 0002 Error Code
E010 0002
Description :
Main Motor (M2) rotation error
Causes :
Detection was performed every 100msec during the drive (after the lock detection) and the lock signal was not detected 5 times in a row (in 500 msec).
Solutions :
1. Check the connector between the Main Motor and the DC Controller PCB (J203).
2. Replace the Main Motor (M2).
3. Replace the DC Controller PCB (PCB1).
Don’t forget, not every error is exactly identical. What fixes the trouble one occasion might not resolve it the next occasion. While the tips in this writing originates from the service manual and typically ought to get your product working, at times other variables might be in play.
If you are looking over this piece of content and have experience with this error message and would like to contribute be sure to leave a comment underneath. Or, if you have read this article and have additional questions then ask. If I have knowledge about the issue then I will reply.