Canon imageRUNNER 1740 E822 0004 Error Code

 

Canon imageRUNNER 1740 E822 0004 Error Code Instructions

Below you will find the service manual information for the Canon imageRUNNER 1740 E822 0004 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon imageRUNNER 1740 E822 0004 Error Code

Service Manual Instructions for the Canon imageRUNNER 1740 E822 0004 Error Code

E822 0004
Description :
Delivery Cooling Fan (Rear) (FM1) error

Causes :
A lock signal was detected for 5 seconds while the Delivery Cooling Fan (Rear) (FM1) was being driven.
The same status was detected again after executing an error retry.

Solutions :
1. Disconnect and then connect the connector (J210) on the DC Controller PCB (PCB1) to check the connection.
2. Replace the Delivery Cooling Fan (Rear) (FM1).
3. Replace the DC Controller PCB (PCB1).



Don’t forget, not every error is entirely identical. What corrects the situation one occasion will possibly not resolve it the next occasion. While the data in this document obtain from the service manual and most often should get your device working, sometimes other variables can be in play.

If you are looking over this page and have information about this malfunction and wish to make a contribution please make sure to leave a comment underneath. Or, if you have read this article and have more questions then ask. If I have experience with the issue then I will reply.

We will be happy to hear your thoughts

Leave a reply

Shopping cart