Canon imageRUNNER 1740 E577 8001 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 1740 E577 8001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 1740 E577 8001 Error Code
E577 8001
Description :
Paddle Motor (M3) error
Causes :
Although the Paddle Motor (M3) was driven for 175 steps, the Paddle failed to move from the Paddle HP Sensor (S3).
Solutions :
1. Check the connector connection of the Paddle HP Sensor (S3) or the Paddle Motor (M3).
2. Check for open circuit of the Harness of the Paddle HP Sensor (S3) or the Paddle Motor (M3).
3. Replace the Paddle HP Sensor (S3).
4. Replace the Paddle Motor (M3).
5. Replace the Finisher Controller PCB.
Don’t forget, not every error is absolutely the same. What remedies the issue one time may possibly not resolve it the next time. While the material in this piece of content is obtained from the service manual and usually ought to get your device functioning, from time to time other things can be in play.
If you are looking over this document and have exposure to this malfunction and desire to share please be sure to leave a comment below. Or, if you have read this article and have more questions then ask. If I have information about the issue then I will respond.
