Canon imageRUNNER 1740 E575 8004 Error Code

 

Canon imageRUNNER 1740 E575 8004 Error Code Instructions

Below you will find the service manual information for the Canon imageRUNNER 1740 E575 8004 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon imageRUNNER 1740 E575 8004 Error Code

Service Manual Instructions for the Canon imageRUNNER 1740 E575 8004 Error Code

E575 8004
Description :
Gripper Motor (M7) clock error

Causes :
When the Gripper Motor (M7) was operated, the Gripper Encoder Sensor (S8) detected rotation of 400 clocks or more.

Solutions :
1. Check the connector connection of the Gripper Encoder Sensor (S8) or the Gripper Motor (M7).
2. Check for open circuit of the Harness of the Gripper Encoder Sensor (S8) or the Gripper Motor (M7).
3. Replace the Gripper Encoder Sensor (S8).
4. Replace the Gripper Motor (M7).
5. Replace the Finisher Controller PCB.


Don’t forget, not every error is absolutely identical. What fixes the trouble one occasion might not get rid of it the next occasion. While the advice in this posting comes from the service manual and most often ought to get your piece of equipment ready to go, at times additional variables can be in play.

If you are looking over this document and have exposure to this fault and desire to make a contribution please be sure to leave a comment underneath. Or, if you have read this article and have additional questions then ask. If I have exposure to the issue then I will answer.

We will be happy to hear your thoughts

Leave a reply

Shopping cart