Canon imageRUNNER 1740 E240 0001 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 1740 E240 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 1740 E240 0001 Error Code
E240 0001
Description :
Controller communication error
Causes :
A serial communication error was detected during printing.
Solutions :
1. Check the connector connection. (All connectors on the DC Controller PCB, J8112 on the Main Controller PCB)
2. Replace the DC Controller PCB (PCB1).
Do not forget, not every error is precisely alike. What corrects the problem one occasion may possibly not get rid of it the next time. While the specifics in this article originates from the service manual and in most cases should get your piece of equipment working, sometimes other reasons may be in play.
If you are looking over this article and have information about this malfunction and would wish to contribute be sure to leave a comment down below. Or, if you have read this article and have additional questions then ask. If I have experience with the situation then I will reply.
