Canon imageRUNNER 1740 E240 0000 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 1740 E240 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 1740 E240 0000 Error Code
E240 0000
Description :
Controller communication error
Causes :
A serial communication error was detected during normal operation.
Solutions :
1. Check the connector connection. (All connectors on the DC Controller PCB, J8112 on the Main Controller PCB)
2. Replace the DC Controller PCB (PCB1).
Do not forget, not every error is precisely alike. What corrects the condition one time might not exactly eliminate it the next occasion. While the data in this blog is inspired by the service manual and usually ought to get your piece of equipment functioning, occasionally additional circumstances could possibly be in play.
If you are looking over this article and have information about this fault and would wish to contribute be sure to leave a comment beneath. Or, if you have read this article and have further questions then ask. If I have knowledge about the difficulty then I will respond.
