Canon imageRUNNER 1740 E110 0002 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 1740 E110 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 1740 E110 0002 Error Code
E110 0002
Description :
Laser Scanner Motor error
Causes :
After the speed lock of the Laser Scanner Motor had been settled, the speed lock signals showed unlocked status 10 times in a row at intervals of 100 msec.
When the same status was detected again after executing an error retry.
Solutions :
1. Check the Laser Scanner Unit connector.
2. Replace the Laser Scanner Unit.
3. Replace the DC Controller PCB (PCB1).
Do not forget, not every error is exactly the same. What corrects the trouble one time might not eliminate it the next time. While the specifics in this written piece hails from the service manual and usually should get your machine working, on occasion other things might be in play.
If you are looking over this article and have information about this error and wish to contribute make sure you leave a comment beneath. Or, if you have read this article and have further questions then ask. If I have experience with the situation then I will answer.
