Canon imageRUNNER 1740 E014 0002 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 1740 E014 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 1740 E014 0002 Error Code
E014 0002
Description :
Fixing Motor (M1) rotation error
Causes :
Detection was performed every 100 msec during the drive (after the lock detection) and the lock signal was not detected 5 times in a row (in 500 msec).
Solutions :
1. Check the connector connection between the Fixing Motor and the DC Controller PCB (J203).
2. Replace the Fixing Motor (M1).
3. Replace the DC Controller PCB (PCB1).
Do not forget, not every error is entirely the same. What fixes the situation one time may possibly not eliminate it the next occasion. While the details in this page originates from the service manual and usually ought to get your device working, occasionally additional circumstances may be in play.
If you are looking over this article and have experience with this error and would wish to share please be sure to leave a comment underneath. Or, if you have read this article and have further questions then ask. If I have experience with the trouble then I will answer.
