Canon imageRUNNER 1740 E013 0001 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 1740 E013 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 1740 E013 0001 Error Code
E013 0001
Description :
Error in rotation of Waste Toner Motor (M3)
Causes :
Lock detection flag was monitored every 2msec, and the same level was detected 600 times in a row.
Solutions :
1. Check the connector connection between the Waste Toner Motor and the DC Controller PCB (J209).
2. Replace the Waste Toner Motor (M3).
3. Replace the DC Controller PCB (PCB1).
Do not forget, not every error is entirely alike. What treats the complication one occasion may possibly not solve it the next time. While the tips in this blog post derives from the service manual and in most cases should get your product working, on occasion other elements may be in play.
If you are looking over this article and have experience with this error and desire to contribute make sure you leave a comment beneath. Or, if you have read this article and have additional questions then ask. If I have information about the difficulty then I will reply.
